FAQs and Troubleshooting
[C205] How do I install Home Assistant ZHA quirks?
To do this you must have a file editor installed on your Home Assistant instance, such as studio code editor. Editing your configuration.yaml file. On your Home Assistant instance click file editor. Click the folder button ("Browse Filesystem") ...
[C205] How do I change the switch type?
The C205 module is preconfigured to work with toggle/rocker switches. If you are using Smartthings, Hubitat, ZHA, or zigbee2mqtt, you will have a device setting to change the switch type to “Momentary”. You must be using the Candeo drivers to access ...
[C-ZB-SM205-2G] Troubleshooting
Please ensure that you have followed all of the instructions precisely. The module will not pair with the hub Please ensure that your hub is in range, typically <30m indoors. Please do a factory reset as outlined above, and try pairing again. Please ...
[C-ZB-SM205-2G] Supported loads
[C-ZB-SM205-2G] Will my Zigbee switch module act as a repeater?
All of our mains powered Zigbee products will act as repeaters within your Zigbee mesh network.
[C-ZB-SM205-2G] How do I install a new Smartthings driver?
Importing the driver. We recommend you unpair any C-ZB-SM205-2G devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available ...
[C-ZB-SM205-2G] How do I install a new Hubitat driver?
Importing the driver. New functionalities: Via Parent Device: Supports on / off / flash (operates both gangs) Reports power / energy / current / voltage events (whole device) Via Child Devices: Supports on / off / flash Setting For Power On Default ...
[C205] How do I install a new Smartthings driver?
Importing the driver. We recommend you unpair any C205 devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available ...
[C205] Will my Zigbee switch module act as a repeater?
All of our mains powered Zigbee products will act as repeaters within your Zigbee mesh network.
[C205] How do I install a new Hubitat driver?
Importing the driver. New functionalities: Adds Power On setting We recommend that any C205 devices added previously should be unpaired, and then paired again after a factory reset. On your Hubitat instance go to Drivers code. Click "+ New driver". ...
[C205] Supported loads
[C205] Troubleshooting
Please ensure that you have followed all of the instructions precisely. The module will not pair with the hub Please ensure that your hub is in range, typically <30m indoors. Please do a factory reset as outlined above, and try pairing again. Please ...