[C-ZB-LC20] Zigbee2mqtt converter

[C-ZB-LC20] Zigbee2mqtt converter


We do have a converter available for zigbee2mqtt.
This is built in to the most up to date zigbee2mqtt, however if you require it please find it here: Zigbee2mqtt Converter 


    • Related Articles

    • [C-ZB-SR5BR] How do I install a new Home Assistant blueprint?

      ? Available Blueprints ? Candeo C-ZB-SR5BR – Multi-Light Dimming Control up to 4 lights from one SR5BR: ? Buttons 1–4 choose which light is “active”. ? Centre button toggles the active light on/off. ? Rotary ring dims the active light (clockwise ...

    • [C-ZB-LC20] Firmware update instructions for Home Assistant (ZHA and zigbee2mqtt)

      After the update, the device should report as C-ZB-LC20v2. zigbee2mqtt The update is available directly within the zigbee2mqtt interface. ZHA 1. Create a new folder inside your Home Assistant “config” directory for storing the OTA firmware file. In ...

    • [C203/C204/C-ZB-DM204] Candeo Zigbee Dimming Modules - Getting started

      Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C203 and C-ZB-DM204 (C204) Instruction Manual Wiring Instructions Please see our wiring article: C203 and C-ZB-DM204 (C204) wiring Installation Instructions ...

    • [C205/C-ZB-SM205-2G] Candeo Zigbee Switch Modules - Getting started

      Getting Started with your Candeo Zigbee Switch Module Download the Instruction Manual here: C205 Instruction Manual C-ZB-SM205-2G Instruction Manual Wiring Instructions Please see our wiring articles: C205 wiring C-ZB-SM205-2G wiring Installation ...

    • [C-ZB-SM205-2G] Troubleshooting

      Please ensure that you have followed all of the instructions precisely. The module will not pair with the hub Please ensure that your hub is in range, typically <30m indoors. Please do a factory reset as outlined above, and try pairing again. Please ...