[C-ZB-LC20] How do I install a new Hubitat driver?

[C-ZB-LC20] How do I install a new Hubitat driver?













Alert
Please note, each LED mode requires a different driver on Hubitat. 
Choose the required drivers from below, and make sure your device is set to the correct mode before pairing.

Importing the driver.
  1. We recommend that any C-ZB-LC20 devices added previously should be unpaired, and then paired again after a factory reset, and choosing the correct mode.
  2. On your Hubitat instance go to Drivers code.
  3. Click "+ New driver".
  4. Click "Import".
  5. Paste one of the following into the box that pops up: 
    1. For CCT mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(CCT%20Mode).groovy
    2. For RGBW mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(RGBW%20Mode).groovy
    3. For RGB mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(RGB%20Mode).groovy
    4. For RGBCCT mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(RGBCCT%20Mode).groovy
    5. For dimmer mode: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-LC20%20Smart%20LED%20Controller%20(Dimmer%20Mode).groovy
  6. Click "Import".
  7. Click "Save".
  8. To add more drivers repeat the process.
  9. NotesPlease note you only need to import the driver once. After the import all new C-ZB-LC20 devices will pick up the new driver.
Changing the driver.

If you would prefer not to unpair your C-ZB-LC20 devices, and add them again, you can change the C-ZB-LC20 driver to one of our custom drivers by importing the driver, and then following the instructions below:
  1. On your Hubitat instance go to "Devices".
  2. Find and click your C-ZB-LC20 device.
  3. Scroll down to "Device information".
  4. In the "Type" box, type in Candeo C-ZB-LC20, and select the Candeo C-ZB-LC20 option that appears with the right mode.
  5. Click "Save device".
  6. Click "Configure" at the top of the page.
  7. Notes
    Any settings changes should also be finished by clicking the "Configure" button.

    • Related Articles

    • [C-ZB-SM205-2G] How do I install a new Hubitat driver?

      Importing the driver. New functionalities: Via Parent Device: Supports on / off / flash (operates both gangs) Reports power / energy / current / voltage events (whole device) Via Child Devices: Supports on / off / flash Setting For Power On Default ...
    • [C-ZB-LC20] How do I install a new Smartthings driver?

      Importing the driver. We recommend you unpair any C-ZB-LC20 devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available ...
    • [C-ZB-SM205-2G] How do I install a new Smartthings driver?

      Importing the driver. We recommend you unpair any C-ZB-SM205-2G devices already paired first. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available ...
    • [C201] How do I install a new Hubitat driver?

      Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...
    • [C205] How do I install a new Hubitat driver?

      Importing the driver. New functionalities: Adds Power On setting We recommend that any C205 devices added previously should be unpaired, and then paired again after a factory reset. On your Hubitat instance go to Drivers code. Click "+ New driver". ...