[CSF1TZ] Anti-freeze function

[CSF1TZ] Anti-freeze function




Turning on

Press and hold the button of the water timer for 8 seconds until the green light flashes twice to turn on the antifreeze function.

Turning off

Press and hold the button of the water timer for 8 seconds until the red light flashes twice to turn off the antifreeze function.

Notes
The default setting for the antifreeze function is off.
Info

Tips: When the antifreeze function is turned on, and the temperature is lower than 5°C, the water timer will automatically shut down. It will not run again until the temperature is higher than 5°C.



    • Related Articles

    • [CSF1TZ] Smartfoss - Getting Started

      Getting Started with your Candeo CSF1TZ Download the Instruction Manual here: Smartfoss Instruction Manual Installation Instructions Battery Installation Factory Reset the Device If you need delete the device from your Smart Life account, or perform ...

    • [CSF1TZ] How do I install Home Assistant ZHA quirks?

      To do this you must have file editor installed on your Home Assistant instance. Editing your configuration.yaml file. On your Home Assistant instance click file editor. Click the folder button ("Browse Filesystem") Select configuration.yaml, and then ...

    • [CSF1TZ] Installing the batteries

      Open the battery slide cover. Remove the battery housing and install 2 x AAA batteries. Re-install the battery housing and slide the cover up back into position.

    • [CSF1TZ] Losing pressure

      Disassembly instructions If you find you are losing pressure, there is a mesh filter fitted into the top of the device. Please remove this using a small screwdriver or a pair of tweezers.

    • [CSF1TZ] Voice control

      Alexa To use the device with Amazon Alexa, you will need to install the Smart Life skill within your Amazon Alexa app. Once Smart Life has been connected to your Alexa app, you will be able to control the watering device by saying: “Alexa, turn on ...