[C-RFZB-SM1] How do I pair my zigbee kinetic module to Hubitat Elevation?
- To initiate pairing mode to pair to Hubitat, open your Hubitat dashboard:
- Go to Devices.
- Click "Add Device".
- Under "Add device manually" select zigbee.
- Press and hold the Control Button on the receiver for 10-15 seconds to simultaneously factory reset and put the device in pairing mode.
- Note: All configuration parameters will be reset after the device is reset or removed from the network.
Related Articles
[C-RFZB-SM1] How do I pair my zigbee kinetic module to my zigbee hub?
For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant ZHA pairing instructions Home Assistant zigbee2mqtt pairing instructions Hubitat pairing instructions ...[C-RFZB-SM1] How do I pair my zigbee kinetic module to Home Assistant? (zigbee2mqtt)
Add your dimmer to your Home Assistant: Open your Home Assistant dashboard. Go to the menu and click on settings. Click "Devices & Services". Click the blue "ADD INTEGRATION" button. Click "Add Zigbee device". Home Assistant will scan for new zigbee ...[C-RFZB-SM1] How do I pair my zigbee kinetic module to Home Assistant? (ZHA)
Add your dimmer to your Home Assistant: Open your Home Assistant dashboard. Go to the menu and click on settings. Click "Devices & Services". Click the blue "ADD INTEGRATION" button. Click "Add Zigbee device". Home Assistant will scan for new zigbee ...[C-RFZB-SM1] How do I pair my zigbee kinetic module to Samsung Smartthings?
To initiate pairing mode to pair to Smartthings, open your Smartthings app: Go to devices. Select the room of your choice. Tap the +. Choose "Add a device". Choose "Scan nearby". Press and hold the Control Button on the receiver for 10-15 seconds to ...[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Hubitat Elevation?
Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...