[C-RFZB-SM1] How do I pair my zigbee kinetic module to Home Assistant? (ZHA)

1. Add your dimmer to your Home Assistant:
1. Open your Home Assistant dashboard.
   
2. Go to the menu and click on settings.
   
3. Click "Devices & Services".
   
4. Click the blue "ADD INTEGRATION" button.
5. Click "Add Zigbee device".
   
6. Home Assistant will scan for new zigbee devices.
2. Press and hold the Control Button on the receiver for 10-15 seconds to simultaneously factory reset and put the device in pairing mode.
   
1. Note: All configuration parameters will be reset after the device is reset or removed from the network.

• Related Articles

• [C-RFZB-SM1] How do I pair my zigbee kinetic module to Home Assistant? (zigbee2mqtt)

  Add your dimmer to your Home Assistant: Open your Home Assistant dashboard. Go to the menu and click on settings. Click "Devices & Services". Click the blue "ADD INTEGRATION" button. Click "Add Zigbee device". Home Assistant will scan for new zigbee ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (ZHA)

  Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...

• [C-RFZB-SM1] How do I pair my zigbee kinetic module to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, Philips Hue or Smartthings please click the relevant link below: Home Assistant ZHA pairing instructions Home Assistant zigbee2mqtt pairing instructions Hubitat pairing instructions ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (zigbee2mqtt)

  Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need ...

• [CSF1TZ] How do I pair my Smartfoss to Home Assistant ZHA?

  We recommend you install our ZHA Smartfoss quirks first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/csf1tz-how-do-i-install-home-assistant-zha-quirks Add your dimmer to your Home Assistant: Open your Home ...