[CMM-1] Using as a Scene Switch (Primary function)

[CMM-1] Using as a Scene Switch (Primary function)



  1. To use as a Scene Switch, select the remote within the Smart Life app, and select Device Trigger from within the function menu (bottom right button).
  2. From here you can create multi-device actions for each button using the “Create Intelligence” option. You will be able to program different actions for single press, double press, and hold (4 seconds).

    • Related Articles

    • [CMM-1 Modmote] Zigbee Scene Remote - Getting Started

      Getting Started with your Candeo CMM-1 Download the Instruction Manual here: Modmote Instruction Manual Installation Instructions The Modmote is fitted with a magnetic back plate than can be fixed to any flat surface using the 3M tape attached. ...

    • [CMM-1] Using as a Dimmer Switch

      The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...

    • [CMM-1] Charging the Modmote

      Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.

    • [CMM-1] Modmote troubleshooting

      The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...

    • [CMM-1] Switching mode

      To switch the mode of the Modmote from Dimming mode to Scene Switch mode (and vice versa), hold down buttons 3 and 4 for 10 seconds, until button 1 flashes green. Wait for 5 seconds before pressing any button, and the remote will switch modes