Related Articles
[CMM-1] Charging the Modmote
Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.
[CMM-1 Modmote] Zigbee Scene Remote - Getting Started
Getting Started with your Candeo CMM-1 Download the Instruction Manual here: Modmote Instruction Manual Installation Instructions The Modmote is fitted with a magnetic back plate than can be fixed to any flat surface using the 3M tape attached. ...
[CMM-1] Modmote troubleshooting
The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...
[CMM-1] Using as a Dimmer Switch
The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...
[CMM-1] Changing the buttons
Candeo offers a range of alternative choices for the buttons on the Modmote, allowing you to change them to suit your requirements. You can remove the button tiles by lifting gently on the outside lip of tthe button tile, with the base of your palm ...