[CMM-1] Instruction booklet

Instruction booklet for CMM-1 can be downloaded here.

• Related Articles

• [CMM-1] Modmote troubleshooting

  The first step we recommend in any troubleshooting is a factory reset. Normally we would suggest simply removing the modmote from your smart hub, and using the reset button to pair it again. If this does not work there is a reset switch underneath ...

• [CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)

  We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...

• [CMM-1] How do I pair the Modmote with Hubitat Elevation?

  Install the custom driver On your Hubitat instance, go to Drivers code. Click "+ New driver". Click "Import". Paste the following web address into the box that pops up: ...

• [CMM-1] How do I pair the Modmote to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat, Smartthings or Tuya Smart Life please click the relevant link below: Home Assistant pairing instructions Hubitat pairing instructions Smartthings pairing instructions Tuya Smart pairing ...

• [CMM-1] Charging the Modmote

  Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.