[CMM-1] How do I install a new Hubitat driver?

Importing the driver.

1. On your Hubitat instance go to Drivers code.
   
2. Click "+ New driver".
   
3. Click "Import".
   
4. Paste the following web address into the box that pops up: 
   https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20Modmote%20Zigbee%20Scene%20Switch.groovy
5. Click "Import".
   
6. Click save.
   
   Please note you only need to import the driver once. All CMM-1 Modmote devices, added after the import will pick up the new driver.

Changing the driver.

If you would prefer not to unpair your Modmote devices, and add them again. You can change the Modmote driver to our custom driver by importing the driver, and then following the instructions below:

1. On your Hubitat instance go to "Devices".
   
2. Find and click your Modmote device.
   
3. Scroll down to "Device information".
   
4. In the "Type" box, type in Candeo Modmote, and select the Candeo Modmote option that appears.
   
5. Click "Save device".
   
6. Click "Configure" at the top of the page.
   

Any settings changes should also be finished by clicking the "Configure" button.

• Related Articles

• [CMM-1] How do I pair the Modmote with Hubitat Elevation?

  Install the custom driver On your Hubitat instance go to Drivers code. Click "+ New driver". Click "Import". Paste the following web address into the box that pops up: ...

• [CMM-1] How do I install a new Smartthings driver?

  Install our new custom driver: We recommend you unpair any modmote devices already paired first. Go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20 Sign in to your Samsung account. Click "Enroll". Click "Available Drivers". Now ...

• [CMM-1] Charging the Modmote

  Use a USB-C charger to charge the remote. The LED at button 3 will glow red to indicate charging. A full charge typically takes 4 hours. When charging is complete the LED at button 3 will glow green.

• [CMM-1] How do I pair the Modmote with Home Assistant? (ZHA)

  We recommend you install our ZHA modmote quirks, and the modmote blueprint first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/cmm-1-how-do-i-install-home-assistant-zha-quirks ...

• [C201] How do I install a new Hubitat driver?

  Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...