[C302-WF] Setting the minimum brightness

1. Open the Smart Life app and select the device.
   
2. Turn on the light, and select the settings icon.
   
3. Ensure that the brightness range settings are unlocked by touching the padlock icon.
   
4. You can now configure the minimum brightness level for the switch.
   
5. Save the setting when you are ready.

• Related Articles

• [C302-WF] Instruction booklet

  The instruction booklet for C302-WF can be downloaded here.

• [C202/C202N] Setting the minimum brightness

  Turn on the light, then press the knob 3 times. The light will blink twice showing that the device is in configuration mode. Adjust the minimum brightness to the lowest level you are satisfied with, then press the knob once to save it.

• [C302-WF] Pairing to Smart Life

  Factory reset the switch: Press and hold the knob for 10 seconds. The light will blink twice to confirm a successful reset. Make sure your phone is prepared: Install the Smart Life app from your store (you can scan the qr code or click the links): ...

• [C302-WF] Wiring Instructions

  Turn off the power To avoid electrical shock and/or equipment damage, disconnect ectrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in the ...

• [C203/C204] Setting minimum brightness

  Adjust the brightness to the desired minimum level using your smart controller app This is typically the lowest level possible where a dim glow is visible without any flickering. Press and hold the Min Set button on the module for 3 seconds (C204) or ...