[C210 Zigbee Dimming Plug] Firmware 1.25 release notes

C210 released in June 26, with firmware version 1.25.

Specific firmware fixes:

• Fixes device which does not turn on when sent the specific command Move With On/Off Command with Move Mode Up
  • This fixes devices not responding to Hue smart buttons long press to increase brightness if the device is off
• Fixes various issues when using Move With On/Off Command and a specified Rate, used by some systems.
• Fixes device which does not always turn on when sent a Move To Level With On/Off Command with non-zero Level
  • This fixes the device not turning on from Hue Scenes / Timers / Automations that only set a brightness (when there is no explicit on command sent first)
  • This resolves an issue in Philips Hue where which required pressing the scene twice to activate correctly on the plug.
• Fixes device flashing when Philips Hue tells it to turn off if it is already off
• Fixes various issues when using Move To Level With On/Off Command and a specified Transition Time
  • This fixes the device not fading down over time when using the Philips Hue Sunset feature.
• Fixes device does not recall a stored Scene when sent a Scene Recall Command.
• Fixes device not always responding to OnOff Cluster Toggle Command in various systems.

Devices with firmware versions 1.23 and 1.24 can be updated manually to 1.25
Devices with any other firmware version cannot be updated.

• Related Articles

• [C210 Zigbee Dimming Plug] Getting Started

  Getting Started with your Candeo C210 Download the Instruction Manual here: C210 Instruction Manual Factory Reset the Device Turn on the plug and lamp. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press). The light will ...

• [201 Family] Candeo Zigbee Dimming Modules - Getting started

  Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C201 Instruction Manual C-ZB-DM201-2G Instruction Manual Wiring Instructions Please see our wiring articles: C201 Wiring C-ZB-DM201-2G Wiring Installation ...

• [C203/C204/C-ZB-DM204] Candeo Zigbee Dimming Modules - Getting started

  Getting Started with your Candeo Zigbee Dimming Module Download the Instruction Manual here: C203 and C-ZB-DM204 (C204) Instruction Manual Wiring Instructions Please see our wiring article: C203 and C-ZB-DM204 (C204) wiring Installation Instructions ...

• [C310] Wi-Fi Dimming Plug - Getting Started

  Getting Started with your Candeo C310 Download the Instruction Manual here: C310 Instruction Manual Pairing If this if your first device compatible with the Smart Life / Tuya ecosystem, you will need to download the Smart Life app from your relevant ...

• [C-ZB-LC20] Firmware update instructions for Home Assistant (ZHA and zigbee2mqtt)

  After the update, the device should report as C-ZB-LC20v2. zigbee2mqtt The update is available directly within the zigbee2mqtt interface. ZHA 1. Create a new folder inside your Home Assistant “config” directory for storing the OTA firmware file. In ...