[C210] How do I pair my zigbee dimming plug to Hubitat Elevation?

[C210] How do I pair my zigbee dimming plug to Hubitat Elevation?


Factory reset
  • It is recommended that you factory reset the device before pairing to a Zigbee network.
  1. Turn on the plug and lamp.
  2. Press the button 3 times quickly, holding for at least 2 seconds on the 3rd press.
  3. The light will flash twice.
Import custom driver
  1. On your Hubitat instance, go to Drivers code.
  2. Click "+ New driver".
  3. Click "Import".
  4. Paste the following into the box that pops up:
    https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20C210%20Zigbee%20Dimming%20Smart%20Plug.groovy
  5. Click "Import".
  6. Click save.
  7. Notes Please note you only need to import the driver once. All C210 devices added after the import will pick up the new driver.
Pairing
  1. Turn on the plug and lamp.
  2. Press the button 6 times quickly.
  3. The light will flash 3 times, indicating that the dimmer has entered pairing mode.
  4. Initiate pairing mode to pair to Hubitat (Adding to your Zigbee Network):
    1. Open your Hubitat instance,
      1. Go to devices.
      2. Click "Add Device".
      3. Under "Add device manually," select Zigbee.