[C210] How do I install a new Hubitat driver?

[C210] How do I install a new Hubitat driver?



Importing the driver.
New functionalities: 
  1. Adds Power On setting
  1. On your Hubitat instance go to Drivers code.
  2. Click "+ New driver".
  3. Click "Import".
  4. Paste the following into the box that pops up: https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/main/Candeo%20C210%20Zigbee%20Dimming%20Smart%20Plug.groovy
  5. Click "Import".
  6. Click "Save".
      Please note you only need to import the driver once. After the import all new C210 devices will pick up the new driver. We recommend that any C210 devices added previously should be unpaired, and then paired again after a factory reset.
Changing the driver.

If you would prefer not to unpair your C210 devices, and add them again, you can change the C210 driver to our custom driver by importing the driver, and then following the instructions below:
  1. On your Hubitat instance go to "Devices".
  2. Find and click your C210 device.
  3. Scroll down to "Device information".
  4. In the "Type" box, type in Candeo C210, and select the Candeo C210 option that appears.
  5. Click "Save device"
  6. Click "Configure" at the top of the page.
Any settings changes should also be finished by clicking the "Configure" button.

    • Related Articles

    • [C210] How do I pair my zigbee dimming plug to Hubitat Elevation?

      Factory reset It is recommended that you factory reset the device before pairing to a Zigbee network. Turn on the plug and lamp. Press the button 3 times quickly, holding for at least 2 seconds on the 3rd press. The light will flash twice. Import ...

    • [C-ZB-LC20] How do I install a new Hubitat driver?

      Please note, each LED mode requires a different driver on Hubitat. Choose the required drivers from below, and make sure your device is set to the correct mode before pairing. Importing the driver. We recommend that any C-ZB-LC20 devices added ...

    • [C-ZB-SM205-2G] How do I install a new Hubitat driver?

      Importing the driver. New functionalities: Via Parent Device: Supports on / off / flash (operates both gangs) Reports power / energy / current / voltage events (whole device) Via Child Devices: Supports on / off / flash Setting For Power On Default ...

    • [C201] How do I install a new Hubitat driver?

      Please note the new driver is currently for product codes #10 and above. Do not install it if your product code # is below 10. You can identify the # code on the back of the device. If you have multiple devices, of both compatible and incompatible ...

    • [C205] How do I install a new Hubitat driver?

      Importing the driver. New functionalities: Adds Power On setting We recommend that any C205 devices added previously should be unpaired, and then paired again after a factory reset. On your Hubitat instance go to Drivers code. Click "+ New driver". ...