[C205] Supported loads

• Related Articles

• [C-ZB-SM205-2G] Supported loads

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (zigbee2mqtt)

  Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need ...

• [C-ZB-SM205-2G] Will my zigbee switch module act as a repeater?

  All of our mains powered zigbee products will act as repeaters within your zigbee mesh network.

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Hubitat Elevation?

  Factory Reset the module: After powering on the module for the first time, the lamp should blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, switch the ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to my zigbee hub?

  For pairing instructions specific to Home Assistant, Hubitat or Smartthings please click the relevant link below: Home Assistant (ZHA) pairing instructions Home Assistant (Zigbee2MQTT) pairing instructions Hubitat pairing instructions Philips Hue ...