[C202/C202N] Setting the minimum brightness

1. Turn on the light, then press the knob 3 times. The light will blink twice showing that the device is in configuration mode.
   
2. Adjust the minimum brightness to the lowest level you are satisfied with, then press the knob once to save it.

• Related Articles

• [C302-WF] Setting the minimum brightness

  Open the Smart Life app and select the device. Turn on the light, and select the settings icon. Ensure that the brightness range settings are unlocked by touching the padlock icon. You can now configure the minimum brightness level for the switch. ...

• [C203/C204/C-ZB-DM204] Setting minimum brightness

  Adjust the brightness to the desired minimum level using your smart controller app. This is typically the lowest level possible where a dim glow is visible without any flickering. Press and hold the Min Set button on the module for 3 seconds ...

• [CMM-1] Using as a Dimmer Switch

  The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...

• [C202/C202N] Instruction booklet

  Instruction booklet for C202 and C202N can be downloaded here.

• [C202/C202N] Can I use my rotary dimmer as a remote to control the brightess of another device? Or in decoupled mode?

  The simple answer to these questions is no, the dimmer can't be used as a remote, nor can it be decoupled. The rotary dimmer must always have a light circuit connected to it, so there is no way to control another device separately from the light ...