[C202/C202N] Latest ZHA firmware
Please note these instructions are currently for ZHA only.
If your date code is 20230828 you do not need to do this update.
The most up to date firmwares have Date Codes: 20230828 or 20240813.
The most up to date sw build id is 1.04 for 20230828, and 1.20 for 20240813.
Please note you should not attempt this update unless your batch # and date code indicate compatibility in the table below.
Firmware Update
To check whether your device is compatible with the firmware update, you will need to check the firmware date code of your switch, and also the “#” number on the back of the switch.
Once you have these 2 numbers, please check this table to confirm whether your device is compatible with the below firmware update.
| # Number | Firmware Date Code | Compatibility |
1-6 | All | Not compatible |
7 | 20220531 | Compatible |
7 | 20230401 | Not compatible |
8 | 20220531 | Compatible |
8 | 20230318 | Compatible |
8 | 20230401 | Not compatible |
9 | 20230401 | Compatible |
Any | 20230824 | Compatible |
Related Articles
[C202/C202N] Home Assistant - ZHA firmware issue
Please note these instructions are currently for ZHA only. If your date code is 20230828 you do not need to do this update. The most up to date firmwares have Date Codes: 20230828 or 20240813. The most up to date sw build id is 1.04 for 20230828, and ...[C202/C202N] How do I pair my zigbee rotary switch to Home Assistant? (ZHA)
Factory Reset the switch: Turn on the light, press the knob 5 times with a long press on the fifth time (3 seconds). Once reset successfully, the lamp will blink 5 times. Note: All configuration parameters will be reset after the device is reset or ...[C202/C202N] How do I pair my zigbee rotary switch to Home Assistant? (zigbee2mqtt)
Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Home Assistant will pick the right version for each C202. Factory Reset the switch: Turn on the light, press the knob 5 times with a long ...[C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (ZHA)
Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need to factory reset the device. To do this, press the reset button 5 times. If the module is not accessible, ...[CSF1TZ] How do I pair my Smartfoss to Home Assistant ZHA?
We recommend you install our ZHA Smartfoss quirks first. The instructions can be found here: https://support.candeo.io/portal/en/kb/articles/csf1tz-how-do-i-install-home-assistant-zha-quirks Add your dimmer to your Home Assistant: Open your Home ...