[C201/C203/C204] Retractive Switch Notes

Requirements

1. Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off)
   
2. Retractive switches should also be press to make, not press to break.
   
1. Some retractive switches have one terminal for each mode, for example the Scolmore click range seem to use L1 for press to make, and L2 for press to break.
   
1. In this case L2 should be avoided.

• Related Articles

• [C-WL-LC60] Retractive Switch Notes

  Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...

• [C-ZB-LC20] Retractive Switch Notes

  Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...

• [C202/C202N] Retractive Switch Notes

  Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...

• [C302-WF] Retractive Switch Notes

  Requirements Retractive switches should be 2 position/way switches (i.e. bottom or top only, no middle, no 2 way/position and off) Retractive switches should also be press to make, not press to break. Some retractive switches have one terminal for ...

• [C-ZB-SM205-2G] How do I pair my zigbee lighting module to Home Assistant? (zigbee2mqtt)

  Add our custom zigbee2mqtt converter to your zigbee2mqtt instance: https://github.com/candeosmart/zigbee2mqtt Factory Reset the module: After powering on the module for the first time, the lamp should slowly blink. If it does not blink, you will need ...