[C201] Adjusting dimming settings

To optimize the performance of the smart module, or to adjust the settings to your preference, you can adjust the brightness at the Min. and Max. level, and adjust dimming speed.

1. MIN adjustment - Switch on the lights. When the lights are on, insert a screwdriver into the MIN dial and turn it to the left to lower the brightness level of the lights. When the light becomes unsteady, turn it slightly back to the right until the light remains steady.
2. MAX adjustment - Switch on the lights. When the lights are on, insert a screwdriver into the MAX dial and turn it to the right to increase the brightness of the lights. When the light becomes unsteady, turn it slightly back to the left until the light remains steady.
3. Dimming Speed adjustment - Insert a screwdriver into the Speed dial. Turn it clockwise to increase the dimming speed and anti-clockwise to decrease the dimming speed.

• Related Articles

• [C203/C204] Setting minimum brightness

  Adjust the brightness to the desired minimum level using your smart controller app. This is typically the lowest level possible where a dim glow is visible without any flickering. Press and hold the Min Set button on the module for 3 seconds (C204) ...

• [C202/C202N] Setting the minimum brightness

  Turn on the light, then press the knob 3 times. The light will blink twice showing that the device is in configuration mode. Adjust the minimum brightness to the lowest level you are satisfied with, then press the knob once to save it.

• [C210] Instruction booklet

  Instruction booklet for C210 can be downloaded here.

• [C302-WF] Setting the minimum brightness

  Open the Smart Life app and select the device. Turn on the light, and select the settings icon. Ensure that the brightness range settings are unlocked by touching the padlock icon. You can now configure the minimum brightness level for the switch. ...

• [C210] How do I pair my zigbee dimming plug to Home Assistant?

  Factory reset It is recommended that you factory reset the device before pairing to a Zigbee network. Turn on the plug and lamp. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press). The light will flash twice. Pairing ...