[C-ZB-SM205-2G] Wiring Instructions

[C-ZB-SM205-2G] Wiring Instructions


  1. Turn off the power.
    1. To avoid electrical shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance.
    2. Be aware that even if the circuit breaker is off, some voltage may remain in the wires — before proceeding with the installation, be sure no voltage is present in the wiring.
    3. Take extra precautions to avoid accidentally turning the device on during installation.
  2. Connect the device according to the diagrams shown below.
NotesPlease note, the switch is optional as the modules can be used with the smart control only if desired.

Wiring - with optional toggle switch


Wiring - 2 way system with toggle switches

The example shown is for only 1 circuit. Repeat the instructions for the 2nd circuit if needed.

​