[C-ZB-SE**] All Candeo Zigbee Sensors - Getting Started

[C-ZB-SE**] All Candeo Zigbee Sensors - Getting Started

Installation Instructions

Door sensor [Click to Expand ▾]
  1. Using the pin tool supplied, press the Reset button for 3 seconds, and release.
  2. The LED will flash red to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.
Motion Sensor [Click to Expand ▾]
  1. Using the pin tool supplied, press the Reset button for 3 seconds, and release.
  2. The LED will flash red to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.
Soil Sensor [Click to Expand ▾]
  1. Put the sensor in pairing mode by pressing and holding the pairing button for 6 seconds.
  2. On your Zigbee smart system, search for a new device.



Temperature & Humidity Sensor [Click to Expand ▾]
  1. Using the pin tool supplied, press the Reset button for 3 seconds, and release.
  2. The LED will flash red to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.
Water Sensor [Click to Expand ▾]
  1. Press and hold the “Set” button for 3 seconds.
  2. The LED will flash to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.

Pairing

Prepare your smart hub:


Home Assistant - ZHA [Click to Expand ▾]


No preparation is needed - the device will work natively with ZHA.
Zigbee2MQTT [Click to Expand ▾]
Works with Zigbee2MQTT

No preparation is needed — the device will work natively with Zigbee2MQTT.

SmartThings [Click to Expand ▾]


You will need to install our driver:
  1. We recommend you unpair any of our sensors already paired first.
  2. On your web browser go to: https://bestow-regional.api.smartthings.com/invite/1J2QyNNJAO20
  3. Sign in to your Samsung account.
  4. Click "Enroll".
  5. Click "Available Drivers".
  6. Now find "Candeo Edge Zigbee Sensors".
  7. Click "Install" under the driver details.
Hubitat [Click to Expand ▾]


You will need to install our driver:

  1. Before adding or updating the driver, we recommend removing any devices of this same sensor model from your Hubitat system
  2. On your Hubitat instance go to Drivers code.
  3. Click "+ New driver".
  4. Click "Import".
  5. Paste the relevant web address from below into the box that pops up: 
    1. Contact sensor: https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/refs/heads/main/Candeo%20C-ZB-SEDC%20Zigbee%20Contact%20Sensor.groovy
    2. Motion Sensor: https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/refs/heads/main/Candeo%20C-ZB-SEMO%20Zigbee%20Motion%20Sensor.groovy
    3. Soil sensor: https://github.com/candeosmart/hubitat-zigbee/blob/main/Candeo%20C-ZB-SESO%20Zigbee%20Soil%20Sensor.groovy
    4. Temperature & Humidity sensor: https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/refs/heads/main/Candeo%20C-ZB-SETE%20Zigbee%20Temperature%20%26%20Humidity%20Sensor.groovy
    5. Water sensor: https://raw.githubusercontent.com/candeosmart/hubitat-zigbee/refs/heads/main/Candeo%20C-ZB-SEWA%20Zigbee%20Water%20Sensor.groovy
  6. Click "Import".
  7. Click "Save".
  8. Perform a factory reset on your sensor, and pair again (if you removed the sensor at the start)
Philips Hue [Click to Expand ▾]
Works with Philips Hue

Core switching and dimming features are natively supported in Philips Hue. For advanced features or custom parameter configuration, a dedicated Zigbee hub platform is recommended.

Amazon Echo [Click to Expand ▾]


The core features are supported natively in Amazon Echo devices that have Zigbee. For more advanced features an alternative Zigbee platform is recommended.
Other Zigbee 3.0 Platforms [Click to Expand ▾]

Please follow the standard device pairing and search procedure outlined in your specific hub's manufacturer documentation.

 

Put the Device in Pairing Mode:

Door sensor [Click to Expand ▾]
  1. Using the pin tool supplied, press the Reset button for 3 seconds, and release.
  2. The LED will flash red to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.
Motion Sensor [Click to Expand ▾]
  1. Using the pin tool supplied, press the Reset button for 3 seconds, and release.
  2. The LED will flash red to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.
Soil Sensor [Click to Expand ▾]
  1. Put the sensor in pairing mode by pressing and holding the pairing button for 6 seconds.
  2. On your Zigbee smart system, search for a new device.



Temperature & Humidity Sensor [Click to Expand ▾]
  1. Using the pin tool supplied, press the Reset button for 3 seconds, and release.
  2. The LED will flash red to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.
Water Sensor [Click to Expand ▾]
  1. Press and hold the “Set” button for 3 seconds.
  2. The LED will flash to indicate the device is in pairing mode.
  3. On your Zigbee smart system, search for a new device.

Need further assistance? Browse Sensor FAQs →