[CSF1TZ] Voice control

[CSF1TZ] Voice control

Device Image

Alexa

To use the device with Amazon Alexa, you will need to install the Smart Life skill within your Amazon Alexa app. Once Smart Life has been connected to your Alexa app, you will be able to control the watering device by saying:
Quote
“Alexa, turn on {your chosen device name}” “Alexa, turn off {your chosen device name}”

Google

To use the device with Google Home, you need to connect Smart Life by following the instructions in the Google Home app. Once Smart Life has been connected to your Google Home, you will be able to control the watering device by saying:
Quote
“Hey Google, turn on {your chosen device name}” “Hey Google, turn off {your chosen device name}”

    • Related Articles

    • [CSF1TZ] Smartfoss - Getting Started

      Manual & Documentation Download the Instruction Manual here: Smartfoss Instruction Manual Installation Instructions Battery Installation Factory Reset the Device If you need delete the device from your Smart Life account, or perform a factory reset: ...

    • [C302-WF] Voice control

      Voice control with Alexa and Google Assistant To allow control with Alexa you need to enable the “Smart Life” skill in the Alexa app. To allow control with Google Assistant you need to set up the “Smart Life” connection in the Google Home app.

    • [CSF1TZ] How do I install Home Assistant ZHA quirks?

      To do this you must have file editor installed on your Home Assistant instance. Editing your configuration.yaml file. On your Home Assistant instance click file editor. Click the folder button ("Browse Filesystem") Select configuration.yaml, and then ...

    • [RD1-Pro] Direct Zigbee Binding

      Introduction The Candeo RD1-Pro with firmware v2 supports direct Zigbee binding, allowing it to control compatible Zigbee lights or Zigbee groups directly. For most Home Assistant users, we strongly recommend using the Candeo binding Blueprints. They ...

    • [CSF1TZ] Installing the batteries

      Open the battery slide cover. Remove the battery housing and install 2 x AAA batteries. Re-install the battery housing and slide the cover up back into position.