[C210] My lights are flickering at low levels.
Diagnosing this issue can be complicated and often dependent on many variables that are unique to the wiring in your house.
However, the most common cause is due to either the total load of the lights being too low, or the wattage of one particular bulb being too low. Please ensure that your lamp is minimum 10W, and each bulb is minimum 10W if using multiple bulbs.
Related Articles
[C310] My lights are flickering at low levels
Diagnosing this issue can be complicated and often dependent on many variables that are unique to the wiring in your house. However, the most common cause is due to either the total load of the lights being too low, or the wattage of one particular ...[C201] My lights are flickering at low levels.
Diagnosing this issue can be complicated and often dependent on many variables that are unique to the wiring in your house. However, the most common cause is due to either the total load of the lights being too low, or the wattage of one particular ...[C210 Zigbee Dimming Plug] Getting Started
Getting Started with your Candeo C210 Download the Instruction Manual here: C210 Instruction Manual Factory Reset the Device Turn on the plug and lamp. Press the button 3 times quickly (holding for at least 2 seconds on the 3rd press). The light will ...[C203/C204/C-ZB-DM204] Troubleshooting
Please ensure that you have followed all of the instructions precisely. The module will not pair with the hub Please ensure that your hub is in range, typically <30m indoors. Please do a factory reset as outlined above, and try pairing again. Please ...[C210 Zigbee Dimming Plug] Firmware 1.25 release notes
C210 released in June 26, with firmware version 1.25. Specific firmware fixes: Fixes device which does not turn on when sent the specific command Move With On/Off Command with Move Mode Up This fixes devices not responding to Hue smart buttons long ...