[C202/C202N] Wiring instructions

1. Turn off the power.
   
1. To avoid electric shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance.
   
2. Be aware that even if the circuit breaker is off, some voltage may remain in the wires — before proceeding with the installation, be sure no voltage is present in the wiring.
   
2. Unscrew the existing switch/dimmer from the wall and before removing the wires note where the wires are connected. Taking a photo is also useful for comparison.
3. Connect the device according to the diagrams shown below for either a 1-way or 2-way/multiway system.
   

Please note that it is critical to get the Live and Switched Live the right way around. This is less important on a non-smart switch, but important on smart switches. If you are in any doubt, please use a multimeter or consult with an electrician.

When wiring a 2-way/multiway system only 1 dimmer can be used in the circuit. All other switches must be (non-smart) push/retractive switches, with only one direction i.e. bottom OR top only. On/off toggle switches are not supported.

Push/retractive switches should be press to make.

• Related Articles

• [C130-S] Instruction booklet

  Instruction booklet for C130-S can be downloaded here.

• [C-ZB-RD1/C-ZB-RD1P] Wiring instructions

  Turn off the power. To avoid electric shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in the ...

• [C302-WF] Wiring Instructions

  Turn off the power To avoid electrical shock and/or equipment damage, disconnect ectrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in the ...

• [C205/C-ZB-SM205-2G] Candeo Zigbee Switch Modules - Getting started

  Getting Started with your Candeo Zigbee Switch Module Download the Instruction Manual here: C205 Instruction Manual C-ZB-SM205-2G Instruction Manual Wiring Instructions Please see our wiring articles: C205 wiring C-ZB-SM205-2G wiring Installation ...

• [C-ZB-LC20] Wiring Instructions

  Turn off the power. To avoid electrical shock and/or equipment damage, disconnect electrical power at the main fuse or circuit breaker before installation and maintenance. Be aware that even if the circuit breaker is off, some voltage may remain in ...