[C202/C202N] Setting the minimum brightness

[C202/C202N] Setting the minimum brightness


  1. Turn on the light, then press the knob 3 times. The light will blink twice showing that the device is in configuration mode.
  2. Adjust the minimum brightness to the lowest level you are satisfied with, then press the knob once to save it.

    • Related Articles

    • [C302-WF] Setting the minimum brightness

      Open the Smart Life app and select the device. Turn on the light, and select the settings icon. Ensure that the brightness range settings are unlocked by touching the padlock icon. You can now configure the minimum brightness level for the switch. ...

    • [C203/C204/C-ZB-DM204] Setting minimum brightness

      Adjust the brightness to the desired minimum level using your smart controller app. This is typically the lowest level possible where a dim glow is visible without any flickering. Press and hold the Min Set button on the module for 3 seconds ...

    • [RD1 Series] Fault Finding & Diagnostics

      Welcome to the Fault Finding & Diagnostics guide. This reference helps isolate physical wiring faults, load instabilities, and Zigbee pairing or driver issues to get your setup running smoothly. 1. First Checks & Common Faults [Click to Expand ▾] ...

    • [RD1 Series] Bulbs, Loads & Dimming Performance

      Welcome to the Bulbs, Loads & Dimming Performance hub. Below you will find accurate specifications regarding supported bulb types, minimum load requirements, dimming technology toggles, and manual hardware calibration steps. 1. Bulb Compatibility & ...

    • [CMM-1] Using as a Dimmer Switch

      The Candeo Modmote can also be used as a dimmer switch with zigbee lights. To use as a Dimmer Switch, ensure that you have paired both the remote and the zigbee lights you want to control. Open the Modmote in the Smart Life app and select Remote ...